Most processes of the plugin are done automatically, once you perform the initial configuration.
The primary exception is the Table Compression feature. This requires you to manually pick which
tables will be compressed. But it does make recommendations for you and provides you with the
information you will need.
A Rock job will be installed that handles all the automated processes for you. You can find the
configuration for this job on the
Installed Plugins > Database Thinner > Automation Settings
page. Each automation step can be either enabled or disabled. You will need to enable the ones you
want to use.
The installed job,
Database Thinner Automation, is configured to run nightly. You can
change the frequency the job runs, but you should probably have it run at least once a week.
The primary configuration setting is how many days old a communication must be before it is compressed.
The default setting is for 6 months, which means any communication that was created within the past 6
months can be viewed just as they are now. Once they reach an age of 6 months (or whatever number of days
you specify) they will be compressed. When that happens, the actual message content is compressed and
archived. In it's place will be a button that users can click to decompress the message and view it.
When the automation job next runs the communication will be re-compressed.
Batch Size option specifies how many communications will be compressed in a single
run of the job. A large church can easily have over 200,000 communications so it may take a number of
runs before everything is compressed.
Decompress Newer Communications has two primary uses. First, if you decide to change the
Compress Content Older Than to a larger value, then when this is enabled it will decompress
the communications that have been previously compressed but should no longer be compressed. Second,
if you ever decide to completely disable this plugin, you can set the
Compress Content Older Than
10,000 days and then run the job a few times to ensure that everything has been
decompressed. Once that is done you can disable this action.
This plugin installs a new file type in your system called
Database Thinner Files. This is
where compressed communication data is stored. By default, it will be stored in your database. Feel free to
configure this file type to store the compressed data elsewhere, such as cloud storage.
Delete System Communications
Two different qualifications must be met for a system communication to be deleted. The first is that it
must be older than the
Delete Communications Older Than value, in days. The second is that
the subject must exactly match one of the
Subjects values. You can manually enter subjects
yourself, but why bother doing it manually? The
Suggest Subjects button will scan the
database and make recommendations on which subjects are likely system e-mails and might be good
candidates for deletion.
The dialog that opens will give you information about subjects that might be system e-mails. Not all
system e-mails should be deleted. That is why these are only suggestions. It's up to you to decide
if you need to keep them forever or not. The list will only be looking at communications that are older
Delete Communications Older Than setting, so you may want to temporarily lower
that value (don't worry you don't need to save) if your database is fairly new.
Along with each subject found, the number of communications will be displayed and the (estimated) storage
space that is being used by all those communications. Tic any checkboxes on the rows you want to include
and then click the Save button in the dialog to add those selections to the subject lines already entered.
Delete Transaction Images
There is only one thing you need to configure here. How many days to keep scanned check images around before
they are deleted. Make sure you verify with your finance team how long you need to keep these around. Once they
are deleted, they are gone and you can't get them back.
Delete Unused Files
Below you will read about a page that lets you find unused files. Under normal configuration, when you remove these
unused files they are actually placed in a quarantine folder. This ensures they cannot be accessed by normal means
so you can find out if they are being used by some external links before they are deleted forever. While in
quarantine you can then later restore those files back into the database. This automation step lets you specify
how long a file will remain quarantined before it's automatically deleted forever.
Database Thinner Automation
This job processes the automation actions that you have configured above. You can configure it to run as often
as you like, though you probably shouldn't run it more often than once per day, and at least once a week.
Reduce Binary Images
Recent versions of Rock added the ability to automatically compress uploaded images so that they are within
a specific resolution size. However, it will not compress images that have already been uploaded. This means
that if you have 1,000 images that existed before this option as added, you are out of luck. It also means
that if you decide to turn that feature on after a bunch of files have been uploaded, you are also out of luck.
Finally, you might also later decide to reduce the maximum size even more, but again all those previously uploaded
images will stay at the old resolution.
This job allows you to take care of those images that have already been uploaded. Add as many of these jobs
as you need to handle compressing various file types. Each job instance allows you to specify the file type
and the maximum resolution. If any file is beyond these dimensions then it will be shrunk down to fit
within these maximum dimensions.
In addition to the
Automation Settings page, there are a few others installed next to it that provide
various features and functions for you.
On this page you can see estimated growth patterns of the various tables in the database. This is really just
informational and you would probably only want to run this scan every few months to see if anything seems like
it's spiking more than normal. The information above tells us some important things about the growth of this database.
- We should expect our database to grow by roughly 15GB over the next year.
- We send a lot of communications, which makes the Compress Communications job a good option.
- Even though we don't have enough data in the Interaction tables to calculate a YoY growth, we can assume they will be growing rapidly as well based on the annual growth rate.
YoY Growth that is infinity, means there is not enough data to estimate the Year over Year
growth. In the example above, the `Interaction` and `InteractionSession` tables are newly added to Rock and we can't
calculate the Year over Year values, because the data has not been around for two years.
This page will scan the compressed data and display savings information. The two pieces that are scanned are the
compressed Communications and any compressed SQL tables. While the Communication numbers are exact, the table
numbers are estimated. The only way to display exact numbers would be to decompress and then recompress the
tables to find out the exact sizes. So while the Compressed Size values are exact, the Uncompressed Size values
are only estimates.
This feature is only available on Azure SQL or on-premise SQL Server 2016 SP1 or later.
This is another page that you will probably only visit once or twice a year. But on here you can see how big
each table is, whether it is compressed or not, and the size it would be after it was compressed. As mentioned
above, some of these numbers are exact and others are estimates. If a table is currently uncompressed then the
Uncompressed Size will be an exact number and the
Compressed Size will be an estimate.
Conversely, if the table is currently compressed then the
Compressed Size will be exact and the
Uncompressed Size will be an estimate.
While compress or decompress operation is being performed on a table, it is taken offline and unavailable for
other parts of Rock to use. Therefore you should only change the compression state of a table during times
when your Rock server can be offline. Scanning the tables will not take them offline.
Each table will include various statistics to help you make informed decisions if you are the kind of person
that likes to know all the nitty gritty details. For the rest of us, there is just a
flag on each table that makes a recommendation on if compressing the table will be worth it. Basically, this
recommendation is made for any tables that provide more than 200MB.
Use this page with care. We do our best to scan as much of the database as we can to look for references to
any files, we cannot guarantee to find them all. Any direct references in the database are found via Foreign Key
constraints. Attribute Values that reference the files are also found. Any indirect references such as HTML
links to the files, cannot be reliably found. This is not a common practice but it does happen. We check a few
common tables for these indirect references, but if your website has these references we might not find them.
Basically, if a plugin behaves correctly and follows the rules, you should be safe.
Now that the big fat warning is out of the way, when used with a little care this page should be fairly safe to use.
There are a few conditions for a file to be considered unused:
- It must not have any direct (foreign key) references in the database.
- It must not have any attribute values that reference the file.
- It must not be linked to in any HTML block contents (including future or past versions).
- The file must be older than the configured
Days Old block setting.
- The file must not be of a file type configured by the
Ignored File Types block setting.
If a file is considered unused, then one of two things will happen. If the
Quarantine Files block
setting is enabled (it is by default), then it will be removed from the database and placed into your Web folder
(don't worry, it's encrypted). It will stay there for the configured quarantine until deleted by the automation
job or you manually purge it. During this period of time it will be available via the
page for you to view or restore the file. Otherwise if the
Quarantine Files block setting is
disabled then it's deleted and purged immediately.
One final thing to be aware of is available disk space. Because files are quarantined into your RockWeb folder,
you need to have enough available free space. This is especially important if you use the bulk delete option while
quarantine is enabled.
Now then, there are a few buttons in the grid you are not familiar with. The first button is the eye. This allows
you to view the file in question. Next to it is the save button with the floppy disk on it. Clicking this will
add a record to a special Defined Type that will reference the binary file. This prevents the file from showing up on
the unused files list in the future, since it is now referenced. Lastly you have the trash button. This will
either delete or quarantine the file, depending on the block settings.
At the bottom of the grid, you will also find the save and trash buttons. These allow you to either
save or delete files in bulk.
It could happen. You might have your Delete Unused Files task configured and then get a call that some image
has vanished from your website. This means two things. First, your website was referencing a file incorrectly.
A Binary File needs to be referenced by an attribute value. So likely it was originally referenced and somebody
did a copy and paste of the hyperlink to the file. Then later that attribute was replaced or deleted and it is
only now that somebody is noticing the file is gone, even though it should have vanished long ago.
The second thing it means is that you need to find a way to put that file back if possible. This page lets you
restore that file. The grid will show the name of the file and, more importantly, the
Guid of the file - which is what you will see in the link that is no longer working.
You can then use the Preview button (eye icon) to view the original file. The way you would normally
fix this issue is to download the original file and upload it somewhere on your server and then fix the link
to point to the file correctly, rather than as a binary file that might end up deleted again. Sometimes this
isn't an option as the link may not even be on your site.
The other way to fix a missing file is to restore it with the recycle button. This will put the file
back in the database with the same Id and Guid values so that existing links will start working again. In
order to prevent the file from being deleted the next time the job scans for unused files, a reference to the
file will be added as a Defined Value. This Defined Value is created inside the
Database Thinner Restored
Files Defined Type. If you want to later delete a restored file, you can go into the Defined Type and
delete the Defined Value and it will eventually appear on your unused files list again.
Finally, you can also manually delete quarantined files after you have decided they are no longer in use and safe
to permenently delete. Normally the automation job will delete the quarantined files after the configured number
of days. However, that only works if you actually enable that step.